IHSE USA 485 Series Repeater and Cross Repeater - Manual (Page 23)

Installation
2014-04-15
23
4.3 Example Applications
This section illustrates typical installations of (Cross) Repeaters:
Pos: 58 /806-IHSE/Installation/Installationsbeispiele/477-xx_COMP @ 5\mod_1291124264328_258.doc @ 44766 @ @ 1
1 2 4 5 3 7 6 1 2 4 5 3 7 6
Single Media Conversion
1 Source (computer, CPU)
2 KVM Extender CPU Unit
3 Interconnect cable (Cat X)
4 (Cross) Repeater
5 Interconnect cable (fiber)
6 KVM Extender CON Unit
7 Console (monitor, keyboard, mouse)
The example shown in this application scenario will be primarily
recommended, if connections through KVM matrix must be bypassed in
case of major matrix problems. Therefore KVM extenders with Cat X and
with fiber connector can be directly connected to each other.