IHSE USA 470 Series CWDM MUX/DEMUX - Manual (Page 6)

CWDM MUX/DEMUX
6
1. Quick Setup
This section briefly describes how to install your CWDM MUX/DEMUX system. Unless you
are an experienced user, we recommend that you follow the full procedures described in the
rest of this manual.
Install system
1. Install the CWDM MUX/DEMUX Transceivers in the Local and Remote
units. Each wavelength must not appear more than once in the system.
Device pairs must carry transceivers with the same wavelength.
2. Connect interconnection cables from Remote/Local unit to CWDM
MUX/DEMUX Box – please mind that you connect the transceivers to the
matching port at the CWDM MUX/DEMUX Box.
3. Connect Local and Remote CWDM MUX/DEMUX units with matching
interconnection cable (Singlemode Fiber).
4. Power up the system.
Done
YES
Link
established?
NO
Check the Fiber cables, and Fiber
connectors
Check, whether the Transceivers
are plugged into the correct ports
1531 in 1531 a.s.o