IHSE USA 481 Series Draco vario HDMI - Manual (Page 54)

Draco KVM Extender
54
2013-08-13
5.5 Configuration File
The KVM Extender contains a configuration file (Config.txt) to set specific
parameters and to read out device and video information. You can find it
on the flash drive of the KVM Extender. The flash drive can be opened by
a mini USB connection to a computer.
The configuration file can be edited with all common text editors.
After setting a parameter, the KVM Extender will have to be restarted.
In order ensure proper functionality of the parameterization, the start
command #CFG has to be written into the first line of the Config.txt file.
5.5.1 Parameters for CPU Units
You can write the following parameters into the configuration file of a CPU
Unit.
DDC-Management
Parameter Function
ENAHPDET Enable hotplug switch for K238-5x series
LOCKEDID Activate DDC write protection
Digital-Audio
Parameter Function
SRC32000 Activate sample rate conversion, sample rate
32 kHz (only with digital audio upgrade module)
SRC44100 Activate sample rate conversion, sample rate
44,1 kHz (only with digital audio upgrade
module)
SRC48000 Activate sample rate conversion, sample rate
48 kHz (only with digital audio upgrade module)
SRC96000 Activate sample rate conversion, sample rate
96 kHz (only with digital audio upgrade module)
SRC_NONE Deactivate sample rate conversion (only with
digital audio upgrade module)