IHSE USA 474 Series Draco vario - Manual (Page 47)

Configuration
2013-03-12
47
The 'Hot Key' sequence to enter Command Mode can be changed. The
following table lists the 'Hot Key' Codes for the available key sequences:
'Hot Key' Code 'Hot Key'
0 Freely selectable (from 2012-01-12)
2 2x
3 2x
4 2x
5 2x
6 2x
7 2x
8 2x
Set freely selectable 'Hot Key' (exemplary)
In order to set a freely selectable 'Hot Key' (e.g. 2x ), use the
following keyboard sequence:
, , <0>, ,
Reset 'Hot Key'
In order to set a 'Hot Key' back to default settings of the extender, press
the key combination + within 5 s after switching on the
CON unit or plugging in a keyboard.
Pos: 63 /806-IHSE/Konfiguration/USB-HID-Ghosting/K477_USB-HID-Ghosting @ 9\mod_1362404683851_6.doc @ 71192 @ 2 @ 4