IHSE USA 474 Series Draco vario - Manual (Page 38)

Draco KVM Extender
38
2013-03-12
3.7.6 Status Upgrade Module USB 2.0
The upgrade module USB 2.0 is fitted with a multi color LED on both sides
for overall status indication and with two further LEDs on the back side for
indication of the connection status.
CPU Module CON Module
1 2 3
1 2 3
1 2 3
1 2 3
Rear View Rear View
Pos. LED Status Description
Off Connection available 1 Failure LED
(green)
On or
Flashing Connection failure (flashing for about
20 s following a connection failure)
Off No connection via interconnect cable 2 Status LED
(green)
On Connection available
LED 3: USB 2.0 Status
LED color Description
Red Device ready
Green Only connection available, no USB 2.0 signal
Green /
light blue
flashing Connection available, no USB 2.0 device
connected
Light blue Connection and USB 2.0 signal available
(operating status)
Pos: 53 /806-IHSE/Installation/UEB_Installation @ 5\mod_1278574971589_6.doc @ 41768 @ 1 @ 1