IBASE IB831 - Manual (Page 33)

BIOS SETUP
IB831 User’s Manual 29
The CPU Configuration menu shows the following CPU details including
the manufacturer, CPU type, its frequency and cache levels. Other
options include:
CMPXCHG8B instruction support
If you want to install Windows NT 4.0 you must disable it.
Enable MSR 3A [2] [0]
VMX enable
Enhanced C-state
Disable or Enable
VIA Processor Power Management
Enable: CPU speed is set to maximum.
Disable: CPU speed is set to minimum.
BIOS SETUP UTILITY
Main Advanced PCIPnP Boot Security Chipset Exit
IDE Configuration
Configure the IDE device (s).
<- Select Screen
↑↓ Select Item
+- Change Field
Tab
Select Field
F1 General Help
F10 Save and Exit
ESC Exit
Serial ATA IDE devices
► Primary IDE Master : [Hard Disk]
► Primary Slave Master : [Not Detected]
SATA Configure as [IDE]
Channel Operating as [Native PCI]
Enhanced SATA Power Management [Disabled]
HIPM Function Port0 [Disabled]
HIPM Function Port1 [Disabled]
VIA SATA Driver Cap Port0 [Hot Plug]
VIA SATA Driver Cap Port1 [Link PM]
The IDE Configuration menu is used to change and/or set the
configuration of the IDE devices installed in the system.
SATA Configure as
IDE or RAID
Channel Operating as IDE
Compatibility or Native PCI