Dacor ACS363 - Manual (Page 5)

2 3
Before using your oven, become familiar with the features and control panel layout.
Below the oven mode touch pads are three touch pads labeled “CANCEL•SECURE,” “LIGHT” and “COOK TIME”. The “CANCEL•SECURE”
touch pad enables the user to cancel the selection of an oven mode or Delay Timed program, or disable the control panel by pressing and
holding the pad for approximately three (3) seconds. Once the control panel is in the “SECURE” mode, “OFF” will be displayed on the clock.
The “LIGHT” touch pad turns the interior oven light “on” and “off.” The “LIGHT” touch pad will remain functional if the control panel has been
disabled. The “COOK TIME” touch pad is used to select the length of time for a cooking process in Delay Timed cooking mode.
Clock functions are selected by pressing the touch pads located below the clock display and oven mode touch pads. Oven functions are
chosen by pressing the touch pad for the desired mode. Once a clock or oven function has been chosen, a description of the selection
will flash in the clock display area.
Self-Clean Instructions
Self-Clean Lock Latch
Broil Reflector
Temperature Sensor
Convection Baffle
Convection Element
Convection Fan
Butterfly Bake Element (patent pending)
Door Gasket
Door Hinge
Exhaust Air Grill Slots
Oven Window
Control Panel
Cool Air Slots
Smoke Eliminator
Broil Element
Rack Support
Oven Rack
Lower Exhaust Grill
Door Handle
Oven Light
Temperature Probe Socket
Oven Light
Figure 1: Oven Features
Figure 2: EPICURE™ ECD227 and ECD230 Wall Oven Control Panel
Figure 3: MILLENNIA™ MCD227 and MCD230 Wall Oven Control Panel
Figure 4: PREFERENCE™ PCD230 Wall Oven Control Panel
IMPORTANT:
After choosing a clock function or oven mode, you have six seconds to perform the next programming step. If the next step is
not complete within six (6) seconds, the program selection displayed on the clock will disappear. Should this occur, just repeat
the initial function selection.
Getting Started