Hummer 2007 H3 - Manual (Page 396)

Removing the Flat Tire and
Installing the Spare Tire
1. Remove the center
cap by placing the
flat end of the wheel
wrench in the slot
on the wheel
and gently pry the
center cap out.
2. Turn the wheel
wrench
counterclockwise
to loosen the
wheel nuts.
Do not remove
them yet.
If your vehicle has locking lug nuts, the key is
supplied in the tool bag. Use the key along
with the wheel wrench to remove the
wheel nuts from the tire.
You will now need to jack up the vehicle using
the following instructions.
396