Hummer 2007 H3 - Manual (Page 147)

Sunroof
Your vehicle may have a power sliding sunroof.
The ignition must be on or in ACC, or Retained
Accessory Power (RAP) must be active. See
Retained Accessory Power (RAP) on page 103.
The switch used to
operate the sunroof is
located in the headliner.
Open/Close: Press and release the back of the
switch to open the sunroof. If the sunshade is in the
closed position, it will automatically open with the
sunroof. To stop the sunroof before it has reached
the full open position press and release the front or
back of the switch. An air deflector will raise when
the sunroof is fully opened.
Press the front of the switch to close the sunroof.
To stop the sunroof before it is fully closed, press
and release the front or back of the switch.
Vent: Press and hold the back of the switch to
vent the sunroof. To stop the sunroof before
it reaches its full vent position, release the switch.
Do not keep the sunroof open for long periods
of time as debris may collect in the tracks.
Sunshade Operation
The sunshade will open automatically open with
the sunroof.
However, it can manually be pulled shut after the
sunroof is closed. To adjust the sunshade,
push it backward or pull it forward to the desired
position. The sunshade cannot be adjusted further
than the current closed position of the sunroof.
Anti-Pinch Feature
If an object is in the path of the sunroof when it is
closing, the anti-pinch feature will detect the
object and stop the sunroof from closing at the
point of the obstruction. The sunroof will then
return to the full-open or vent position, and the air
deflector will raise.
147