Hummer 2007 H3 - Manual (Page 364)

3. Pull the taillamp assembly away from the
vehicle.
4. Turn the bulb socket counterclockwise to
remove it from the taillamp assembly.
5. Holding the socket, pull the old bulb to
release it from the socket.
6. Push the new bulb into the socket until it
clicks.
7. Insert the bulb socket into the taillamp
assembly and turn it clockwise to secure.
8. Reinstall the taillamp assembly by lining up
the locator pins with the retainers in the
vehicle’s body.
9. Reinstall the two screws and tighten.
10. Close the swing-gate.
License Plate Lamp
To replace one of these bulbs, do the following:
1. Reach under the bumper for the bulb socket.
2. Remove the two screws holding the license
plate lamp.
3. Pull the license plate lamp away from the
fascia.
364