Quick reference guide – Directed Electronics AMX 8.5 User Manual

Page 36

QUICK REFERENCE GUIDE

To lock/arm using your 2-way remote

■ To arm the system press

for one second. The doors will lock (if con-

nected). The in-vehicle status LED will begin to flash. The Failsafe

Starter Kill will prevent the vehicle’s starter from cranking if it has been
installed. The vehicle’s horn (if connected) will honk and the parking
lights will flash once to confirm arming of the system.

To unlock/disarm using your 2-way remote

■ To disarm the system press

for one second. The doors will unlock (if

connected). The Failsafe

Starter Kill will be deactivated and the vehicle’s

horn (if connected) will honk twice and the parking lights will flash twice.

Disabling the Failsafe

Starter Kill without a 2-way remote

■ Turn on the ignition. Press and release the Valet

switch once within 10

seconds. The in-vehicle status LED will stop flashing and the vehicle
should start. Be sure to check with the installer for the location of the
Valet

switch.

To remote start the vehicle

■ Press

twice. The parking lights will turn on (if connected) and the

vehicle will start and run for the programmed amount of time.

To enter or exit Valet

Mode

■ Turn the ignition to the "ON" position. Turn the ignition back off. Press

and release the Valet

switch once within 10 seconds. The in-vehicle

status LED will light steadily if you have entered Valet

Mode. To exit Va-

let

Mode, repeat the steps above. The in-vehicle status LED will turn off

when exiting Valet

Mode.

To activate Panic Mode

■ Press and hold

for 1.5 seconds.

To disable the remote start system

■ To disable the remote start, move the shutdown toggle switch to the OFF

position.

Location of Shutdown Switch______________________________

Cut along dotted line and f

old f

r a quick and eas

efer

ence to k

eep in y

our pur

se or w

allet.

✂