Panic mode, Valet, Mode – Directed Electronics AMX 8.5 User Manual

Page 19

panic mode

If you are threatened in or near your vehicle, you can attract

attention by triggering the system with your 2-way remote. Just

press

for 3-seconds, and you will enter Panic Mode. The

horn will honk (if connected) and the parking lights (if

connected) will flash for the programmed duration. To stop Panic

Mode at any time, press

on the 2-way remote.

The remote responds with one flash of the Red LED upon

entering Panic Mode and two flashes of the Red LED upon

exiting Panic Mode.

valet

mode

You can prevent your system from automatically activating the

Failsafe

Starter Kill and locking the doors by using Valet

Mode.

This is very useful when washing the vehicle or having it serviced.

In Valet

Mode, the starter kill cannot be activated, even with the

2-way remote, but all convenience functions (door locks, remote

start, etc.) will continue to work normally.

To enter or exit Valet

Mode:

1. Turn the ignition On.

2. Turn the ignition Off.

3. Press and release the Valet

button once within 10 seconds.

DRW-35

noottee:: In order for Panic Mode to be effective, the vehicle’s
horn (or optional siren) as well as the vehicle’s parking
lights must be connected.