Directed Electronics AMX 8.5 - Manual (Page 18)

15 © 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
The remote will indicate unlock notification with 2 beeps and 3
flashes of the Orange LED.
disabling the starter kill without a 2-way remote
If your 2-way remote is lost or damaged, you can manually over-
ride the starter kill. To do this, you must have the vehicle's igni-
tion key and know where the Valet ® button is located. Be sure to
check with your installer at the time of installation for the loca-
tion of the Valet ® button.
To override the starter kill, turn
the ignition to the On position.
Press the Valet ® button once
within 10 seconds. The in-
vehicle in-vehicle status LED will stop flashing and the vehicle should
start. If it does not start you may have waited too long; turn the igni-
tion Off and On and try again.
Location of Valet ® Button_________________________________
The remote will indicate the starter kill disable notification with
2 beeps and 3 flashes of the Orange LED.
DRW-35
«