HUBER+SUHNER MASTERLINE Ultimate Hybrid - Manual (Page 2)

HUBER+SUHNER disclaims any liability resulting from incorrect installation and use, including any damages resulting from the use of
tools and accessories other than the ones recommended herein. Any installation performed by unqualified personnel voids the product
warranty provided by HUBER+SUHNER. All due care and attention must be exercised when performing the installation of these pro-
ducts. For advice concerning the general handling of these products please contact HUBER+SUHNER.
Step 4 Rig a rope to allow cable assembly to be hoisted up. Fit carabiner
through pulling eye.
• Pull Assembly up to the mast
Important:
Only use pulling eye on MLUH connector head or hoisting grip if
provided.
Step 5 Hook-in MLUH head at mounting bracket and secure with retained
screws.
Step 6 Fix cable to the mast using suitable clamps.
Recommended spacing between clamps is 1m.
Clamps should be applied to hybrid cable starting from a point 1m
below the housing proceeding down to the bottom of the mast.
Step 7 Earth assembly to the mast using an earth link.
Recommendation is 16mm 2 / 6 AWG with M8 lugs.
NOTE: the earthing cable can also come in black.
Step 8 The remote radios are connected with fiber optic jumpers, which are
terminated with Q-ODC plug connectors and RRH compatible
interfaces. The power jumpers are terminated with a rugged circular
plastic plug connector and are blunt cut on the RRH side.
INSTALLATION MANUAL
MASTERLINE Ultimate Hybrid