Directed Electronics 5 - Manual (Page 30)

27 © 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
remote valet
z The transmitter channel programmed into this feature will
make the system enter/exit valet mode.
remote start
z This feature is only available with IntelliStart connected
z The transmitter channel programmed into this feature will
activate or shut down the Intellistart remote start system.
window control
z This feature is only available with SmartWindows connected
z The transmitter channel programmed into this feature will
activate the vent or roll down feature of the SmartWindows
system.
clear all remotes
z This feature will erase all remote codes from the system
memory. This feature is convenient for erasing any transmit-
ters that have been lost, stolen, or incorrectly programmed
into the system.
z After entering this feature press any button on the transmit-
ter; the siren will chirp to indicate that all transmitters have
been erased from memory.