HP Velotechnik Go SwissDrive system for HP Velotechnik - Manual (Page 12)

Notes for the user
10
Picture 7: Konfiguration menu
Date and time
Date and time are set in Date & time settings
of the configuration menu. To change the
value first use the browse button to go to the
configuration menu. By using "+" or "-" you
can now access the Date & time entry. Press
the confirm button to enter the setup screen.
Hour, minute, day, month, and year can be
adjusted now. Use "+" or "-" to jump to the
respective value. Press the confirm button
again to be able to increase ("+" button) or
decrease ("-" button) the value. Having
finished press the confirm button to be able
to access another value. At the end navigate
back to the top entry and press confirm
button again in order to get back to
configuration menu
Language
Language is also set in the configuration menu.
To change the value first use the browse
button to go to the configuration menu. By
using + or – you can now access the System
settings entry. Press the confirm button to
enter the setup screen. Use + or – to jump to
the desired language. To set this language as
display language press the confirm button
again
Remote control button functions
Your Evo system is operated by a remote
control, which can be fitted next to the
handlebar grip on either side. The remote
control features five buttons. A description of
their individual functions is provided below.
On/Off button:
Picture 8: Remote control, On/Off button
The On/Off button is used to activate the
entire GO S
WISS
D
RIVE
motor system. Shortly
after you have pressed this button, the display
should come on and the entire system should
be ready to go. Pressing the On/Off button
again deactivates the system.