Daewoo DF-8100 - Manual (Page 12)

SETUP
21 20
Initial Installation
6 Select the desired disc playback subtitle language using […/†]. Press
[ENTER] to confirm.
7 The DVD Recorder+VCR detects channels automatically and stores them
in memory.
8 After finishing Auto Channel Search, set the clock.
9 Use [œ/√] to move left/right and use […/†] to change the settings.
10 After setting the clock, press [ENTER] to confirm. If you cancel the process
during Initial Installation, you should repeat this procedure.
Installation
Please select disc subtitle language:
Default
English
Spanish
French
Czech
Danish
German
Instructions
Enter-Confirm Setup-Exit Move …†
Installation
Searching for available TV stations:
2 channels found
Please wait...
Instructions
Setup-Exit
Set Clock
Please set the clock:
Time : 13 : 00
Date : Jan / 02 / 2010 (SAT)
Instructions
Enter-Confirm Setup-Exit Move …†
…
†
Installation
Manual Set
Auto Set
Set Clock
Adjust Channels
Instructions
Enter-Confirm Setup-Exit
Move …†
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH02
Fine Tune
Decoder
Off
Store PR01
Program Name P-01
Instructions
Enter-Confirm Setup-Exit Move …†
Select The
standard.
PAL-BG
PAL-II
PAL-DK
SECAM-L
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH02
Fine Tune
Decoder
Off
Store PR01
Program Name P-01
Instructions
Enter-Confirm Setup-Exit Move …†
Select The
Reception.
Aerial
Cable
The DVD Recorder+VCR Setup menu includes six categories, including: Installation, Recording Options,
Languages, Preferences, System Info, and Restore Defaults. Press [SETUP] and [œ/√] on the remote control to
view the first and second levels of the Setup menu.
Setup Menu Overview
1
Press [SETUP]. The Setup menu appears.
2 Use [œ/√] to select the desired category.
3 While the desired category is selected, press […/†] to move to the second level.
4 Press [ENTER] to move to the third level.
5
Use […/†] to select the desired setting, then press [ENTER] to confirm your selection.
Some items require additional steps. Press [SETUP] at any time to return to the previous menu.
6 Press [SETUP] to exit the Setup menu.
Menu Navigation
Initial Setup Initial Setup
Manual Set
To complete the set-up of your DVD Recorder+VCR when the auto set has
not stored all of the channels or when you wish to store a new channel.
1
Press [SETUP]. The Setup menu appears.
2
Use [œ/√] to select ‘Installation‘.
3 While ‘Installation‘ is selected, press [†] to select ‘Manual Set‘.
4 Press [ENTER]. The ‘Manual Setup’ menu appears.
5 Use […/†] to select ‘Standard‘. Press [ENTER] to move to the second
level.
6
Use […/†] to select the desired ‘Standard’ (PAL-BG, PAL-II, PAL-DK, or
SECAM-L), then press [ENTER].
7 Use […/†] to select ‘Reception‘. Press [ENTER] to move to the second
level.
8 Use […/†] to select the desired broadcast system (Aerial or Cable),
then press [ENTER].
Aerial: If you are using a standard antenna to receive channels.
Cable: If you are using basic cable to receive channels.
INSTALLATION Settings