Honestech VHS to DVD 5.0 Deluxe User Manual
Page 73

73. VHS to DVD 5.0 Deluxe
Video Problems
No video:
Check your cable connections to make sure they are secure.
Verify you are connecting your cables to
the ports labeled „Output‟ on your video player.
Verify you are only connecting one type of video cable, RCA (yellow) or S-Video.
Verify the output ports of your video player work by testing them with your television.
Verify the USB 2.0 VIDBOX II capture device is plugged into your computer directly and
not through a USB hub.
Check your video & audio device settings from the Record Settings control panel (see
Step Two of the Advanced Mode
– Capture section).
Verify your video cable connections setting by
clicking the „Settings‟ button next to the
Video Device listing (see Step Two of the Advanced Mode
– Capture section).
Disconnect additional monitors
Choppy, skipping, or stuttering video:
Verify your computer meets the programs minimum system requirements.
Avoid the following actions while recording and burning:
- Locking the workstation.
- Running other applications in full screen mode.
- Running CPU intensive programs.
Lower the Recording Resolution setting:
- Easy Mode: check the 'Lower recording resolution' option at the bottom of Step 4
- Advanced Mode: click the Record Settings (gears) button at the bottom of the Capture
screen and select the Format 'Settings' button.
Select a resolution option that is lower than the one currently set for your system.