Honestech VHS to DVD 5.0 Deluxe - Manual (Page 25)

25. VHS to DVD 5.0 Deluxe
Step 5. Record and Burn DVD

Position your video tape/source to the point where you wish to begin recording and start
playback.

Use the Recording Volume slider to adjust the recording volume, visible in the Volume
Meters to the left. *For best recording volume, set the volume slider so the meters spike in
the yellow but not in the red.
Tip: It is always a good idea to preview the loudest sections of your video source
while adjusting your recording volume. This will help you to avoid distortion when the
signal peaks in the red during actual recording.

Once your video appears in the Video preview screen on the left, click the Start button to
start recording. Click the Stop button to manually stop the recording at any time.

After the recording time selected in step 4 has elapsed, the program will automatically begin
the disc burning process. The disc will eject automatically upon completion.
*Warning: Manually ejecting your disc before completion can cause the disc to
malfunction.
Click the
exit door button to exit the program.