Hoist Fitness HD-1400 - Manual (Page 39)

Page - 38 HD1400 Assembly
OW N E R S
M A N U A L
Continued: GENERAL MAINTENANCE INFORMATION
Cable Tension:
Seat Sleeves, Turcite Bushings:
Linear Bearings:
F Referring to the Assembly/Owners Manual, check all cable bolts and attachments to be sure they are properly
attached.
Check slack in cables and readjust cable tension if needed.
Wipe down adjusting tubes with a dust free rag before applying lubricant.
Lubricate seat sleeves and turcite bushings with a Silicon or Teflon based lubricant spray.
Referring to the Assembly/ Owners manual carefully dis-assemble the bearing from its housing and place a finger
full of light grease (lithium, super lube, etc.) into the inside of the bearing. Using your finger, press the grease into the
ball-bearings and their tracks. Repeat until the ball-bearing tracks are full of grease. Insert the shaft back into the
bearing and wipe off excess grease.
F
F
F
F
PLEASE KEEP THIS FOR YOUR RECORDS.