Hoist Fitness HD-1400 - Manual (Page 18)

S H I E L D A S S E M B L Y
Step 4
22 - Frame Shield
Part Descriptions
L - 1/2”-13 UNC x 4 1/2” Hex Bolt
M - 1/4”-24 UNF x 5” Button Head Bolt
AA - 1/2” Flat Washer
AD - 1/4” Flat Washer
BA - 1/2” Nylok Nut
BC - 1/4” Nylok Nut
CS - Placard (Right)
CT - Placard (Left)
DB - Spacer
Hardware Descriptions
Page - 17 HD1400 Assembly
OW N E R S
M A N U A L
Attach (22), (CS), and (CT) as shown. bolts.
Wrench Tighten
*IMPORTANT*
Now that the Hd1400 machine is completely assembled take time
to assure that your unit is assembled square and perpendicular. To
check this use a Level to check that the Guide Rods are perpendicular
in both directions. If they are not perpendicular in both directions. It
will be necessary to loosen some Frame hardware to re-align the Frame
and re-tighten bolts.