Dynex DX-LCD22-09 - Manual (Page 7)

TV components
7
Back Remote control
# Jack Description
1 HDMI/DVI IN Connect an HDMI or DVI device to
this jack. To connect an DVI device,
you need to connect an HDMI-DVI
cable and connect an audio cable to
the VGA AUDIO IN jack.
2 VGA/AUDIO IN Connect a computer with a VGA
cable to this jack. Connect the audio
output from a computer or DVI
source to the mini jack.
3 VIDEO (composite)/
S-VIDEO/AUDIO IN Connect the composite video output
cable (Video), or the S-Video output
cable and audio cables (L/R) from an
external AV source to these jacks.
4 COMPONENT/
AUDIO IN Connect the component output
cables (Y, Cb/Pb, Cr/Pr) and audio
cables (L/R) from an external AV
source to these jacks.
5 RF (ANT) IN Connect a TV antenna or cable TV
cable to this jack.
6 RS-232 IN For service only. Do not use.
7 Headphone jack Connect your headphones to this
jack.
1 2 3 4 5 6 7
# Button Description
1
(POWER)/Standby Press to turn your TV on. Press again
to turn your TV to standby.
2 ZOOM Press to select the aspect ratio of your
TV picture. Options include Normal,
Wide1, Wide2, Zoom, and Cinema.
3 INPUT Press to open the menu to select the
input source.
4 COMP/HDMI/VIDEO/
TV Press to directly select the TV input
source.
5 Numbers Press to enter a channel number or
input a password.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23