Hoefer PS2A200 - Manual (Page 13)

Specifications
Power requirement
Frequency
47–63 Hz
Line voltage 90–265 VAC
Power consumption 300 W maximum
Power output 200 W maximum
User interface 4 line × 16 character
backlit LCD display,
membrane keypad
Programmable parameters
3 named protocols
3 steps maximum for each protocol
0–200 V, 1 V step
0–2000 mA, 1 mA step
0–200 W, 1 W step
00:01–99:59 h:min, 1 min step
1–9 999 Vh, 1 Vh step
Communications port
RS232 9-pin male serial connector,
1200 or 9600 baud, no parity, 8 data bits,
1 stop bit, no flow control
Operating environment
Indoor use, 5–40 °C, relative humidity 0–90% noncon-
densing, pollution degree 2, overvoltage category II
Dimensions (h × w × d) 22 × 12 × 28 cm
(8.6 × 4.3 × 10.7 in)
Weight 2.6 kg (5.8 lb)
Safety Open circuit message if resis-
tance is ≥300 kΩ
Product certifications
Safety
UL61010A-1: 10/93,
EN61010-1: 1993
(IEC1010-1),
CSA (22.1010.1-92)
Emissions EN55011: 1991 Class B
Immunity EN50 082-1:92
CE
•
p4
This declaration of conformity
is only valid for the instrument
when it is:
• used in laboratory locations
• used as delivered from Hoefer,
Inc. except for alterations
described in the user manual
• connected to other CE-labeled
instruments or products recom-
mended or approved by
Hoefer, Inc.