Highgear PulseWare Duo - Manual (Page 24)

23
english
OPERATING THE WATCH
OPERATING THE CHRONOGRAPH – PULSEWARE MAX
Pulseware Max heart rate monitors are equipped with a 24-hour 26-
lap chronograph. For the first 59m 59s of timing the resolution is 0.1
second. After the first hour the resolution of the timing is seconds.
The top line of the display details the
CURRENT LAP NUMBER. The lower
display line is TIME FOR CURRENT
LAP. When the Chronograph is running, the
middle line of the display will indicate LAP.
When the Chronograph is stopped, the middle
line of the display will indicate STP.
When you advance to a new lap, the upper
line will display TOTAL ELAPSED TIME
for workout and the lower line will display
TIME FOR PRECEDING LAP.
You can VIEW YOUR HEART RATE in any
Mode by touching the sensors on the top
plate with your index and middle fingers for
5 seconds. HEART RATE will display for 2
seconds then display return current operating
mode. This is also a convenient way to monitor
your waking or resting heart rate if you are on
a competitive training program.
Pulseware_DuoMax_HighGear.indb Sec1:23 Pulseware_DuoMax_HighGear.indb Sec1:23 2/17/06 12:34:12 PM 2/17/06 12:34:12 PM