Guralp Systems CMG-3EX-EAM - Manual (Page 6)

CMG-3EX-EAM Digital Broadband Seismometer
•
A power and data connector, labelled DATA;
•
A GPS receiver connector, labelled GPS;
•
Five coloured push-buttons (described below);
•
A red LED (next to the yellow push-button) to indicate when
data is being flushed to storage (described below); and
•
Two LEDs, one red, one green, next to the black push-button,
to indicate the progress of locking, unlocking and centring
operations.
The five connectors, NET, GPIO, USB, DATA and GPS, are connected
internally to the embedded acquisition module and are described in
MAN-EAM-0001.
The use of the “North” indication and the bubble level are described in
MAN-C3E-0001.
The use of the push-buttons and LEDs are described in the following
section.
3.1 Mass Control
The sensors' masses can be locked, unlocked and centred using the
digitiser's command line, the embedded acquisition module's text or
web interface, Scream! software or the push-buttons on the top of the
instrument. This section describes how to use the push buttons.
6 Issue A