Guntermann & Drunck UCON-IP-NEO Web Interface - Manual (Page 22)

Guntermann & Drunck GmbH UCON-IP-NEO Web interface
Under IP address and Port, you enter the IP address and the port of the
syslog server that is to receive the syslog messages.
In addition, you can also determine the protocol type (
TCP or UPD).
If you want to transmit your entries to the IP user module
by pressing the
button Transfer to device, but you have not entered an IP address for a
syslog server, the following message appears on your screen:
In this case, enter the required information for the certificate and the key.
If you have entered all required information, press the button
Transfer to
device. In the lower area, you receive a notification about the saving process
with a "Please wait..." message.
Note:
If you intend to also communicate with a second syslog server, please repeat the
previously described steps in the area
Syslog server 1.
Be sure to consider the notes regarding the impermissible special characters in
Chapter 1.2 !
Page 22