Guntermann & Drunck UCON-IP-NEO Web Interface - Manual (Page 13)

Guntermann & Drunck GmbH UCON-IP-NEO Web interface
In the section Global settings, you have the following entry options:
 Assignment of global settings
Indicate here whether the IP address is to be a static or a
dynamic assignment (DHCP)
 Host name The host name to be assigned to the IP user module
 Domain Indicate here which domain the IP user module is to belong
to
 Gateway Indicate here via which standard gateway
the IP user module is to be accessed
 DNS-Server 1 Enter the P address of the DNS-Server
 DNS-Server 2 See above
Note:
If you indicated in the field IP assignment (in the area for network settings) the
value as static, but in the field Assignment of global settings (in the area of
Global settings) you entered the value DHCP, you get the following warning:
Pay close attention that the values for the fields IP assignment and
assignment of global settings correspond.
After you made your changes, you transmit them to the IP user module by
clicking on
Transfer to device. The following notification window opens:
If you decided to use this IP address for the IP user module in the future, you
have to reconnect to the IP user module within 5 minutes. From the time of the
next login, the IP user module can be accessed in the network with the new IP
address.
Page 13