Guntermann & Drunck LwLVision-USB 2.0 - Manual (Page 9)

Installation
G&D LwLVision-USB 2.0 · 6
Installing the computer module
The computer, whose signals are transmitted to the remote console, is connected to
the LwLVision-PC computer module. A local console can optionally be connected to
the computer module.
Connecting the computer’s KVM interfaces
DVI/VGA CPU: Connect the computer’s video output to this interface.
If the computer provides a digital DVI interface, use the digital video cable
(DVI-D-SL-M/M-2).
Use the analog video cable (VGA-M/DVI-A-M-2) for an analog VGA interface.
USB Keyb./Mouse CPU: Use the USB-AM/BM-2 cable to connect one of the computer’s
USB ports to this interface.
PS/2 Keyb./Mouse CPU: Connect the PS/2 connection cable (SOKA-G-2 ) to this
interface.
Connect the keyboard plug of the connection cable to the computer’s purple
PS/2 keyboard interface.
Connect the mouse plug of the connection cable to the computer’s green
PS/2 mouse interface.
NOTE: Mouse and keyboard signals of both consoles can be transmitted to the
computer via USB or PS/2 interfaces.
Main
Power
USB 2.0 Trans.
Tx Rx
RS 232
Red. Power DVI/VGA Out
Line In Line Out USB 2.0 CPU
Service
Mouse Keyb. PS/2
Trans. Tx Rx DVI/VGA CPU
PS/2 USB Keyb./Mouse CPU