Guntermann & Drunck LwLVision-USB 2.0 - Manual (Page 5)

Safety instructions
G&D LwLVision-USB 2.0 · 2
Special instruction for devices using laser technology
The devices of the LwLVision series use components with laser technology, which
comply with laser class 1.
They meet the requirements according to DIN EN 60825-1:2001-11, IEC 60825-1 as
well as U.S. CFR 1040.10 and 1040.11.
Mind the following advices when dealing with laser beams:
! Avoid eye contact with laser beam
Although class 1 laser are considered nonhazardous, direct eye contact should
be avoided. Do not stare into the beam or view directly with optical instruments.
! Always connect optical connections or cover them with protection caps
Optical connections of the Transmission socket as well as cable plugs must always
be covered with a connector or a protection cap.
! Only use G&D certified transmission modules
It is not allowed to use transmission modules that do not comply with laser
class 1 according to DIN EN 60825-1:2001-11. By applying such modules, the
compliance of the given instructions and recommendations for laser safety can-
not be guaranteed.
The guarantee of complying with all relevant instructions can only be given by
applying original components. The devices must therefore only be operated with
G&D certified transmission modules.
LASER CLASS 1
DIN EN 60825-1:2001-11
Complies with 21 CFR
1040.10 and 1040.11
Class 1 Laser Product