Guntermann & Drunck LwLVision-USB 2.0 User Manual
Page 13
Installation
G&D LwLVision-USB 2.0 · 10
Optional: Connecting a serial device of audio devices
RS232:
Connect the serial end device to this interface.
Micro In:
Connect a microphone to this interface.
Speaker:
Connect the console speakers to this interface.
Establishing the data transmission to the computer module
Trans. Tx:
Insert the SC plug of a fibre optic cable.
Connect the other end of the cable to the Trans. Rx interface of the user module.
Trans. Rx:
Insert the SC plug of a fibre optic cable.
Connect the other end of the cable to the Trans. Tx interface of the user module.
USB 2.0 Trans. Tx:
Insert the LC plug of a fibre optic cable.
Connect the other end of the cable to the USB 2.0 Trans. Rx interface of the
user module.
USB 2.0 Trans. Rx:
Insert the LC plug of a fibre optic cable.
Connect the other end of the cable to the USB 2.0 Trans. Tx interface of the
user module.
IMPORTANT:
The device uses laser technology complying with laser class 1. Although
class 1 laser beams are considered nonhazardous, avoid direct eye contact.
Do not stare into the beam using optical instruments.
NOTE:
Please remove the protection caps from the Transmission interface and the
cable plugs.
NOTE:
Please remove the protection caps from the USB 2.0 Trans. and the cable
plugs.
RS 232
Micro In Speaker
Trans.
Tx
Rx
USB 2.0 Trans.
Tx
Rx
Service
VGA Out
DVI Out
Red. Power
USB 2.0 Devices
Mouse
Keyb.
PS/2
Main
Power
Mouse
Keyb.
USB