Gullco KBM-28 - Manual (Page 7)

3
KBM
®
-28 PLATE EDGE BEVELLING MACHINE DETAILS
This manual covers the operation instructions, maintenance requirements and provides parts lists
for the Gullco Plate Edge Bevelling Machine, part number: KBM
®
-28-100.
DECLARATION OF CONFORMITY - CE - designed and manufactured in compliance with
2006/42/EC provisions and further amendments.
MACHINE SPECIFICATIONS
Maximum Bevel Width: 1.10" [28 mm] at standard 30° bevel angle on material with a
tensile strength of 64,000 lb/in² [45 Kg/mm²] (multiple passes)
Maximum Bevel Depth: 0.95" [24.2 mm] at standard 30° bevel angle on material with a
tensile strength of 64,000 lb/in² [45 Kg/mm²] (multiple passes)
Minimum Plate Thickness: 5/16" (8.0 mm)
Maximum Plate Thickness: 2" (50 mm)
Bevel Speed: 10’ [3 m] per minute
†
Motor: 3 H.p., 3 phase, available for 230, 460 and 575 V at 60 Hz. and
also 380 and 400/415 V at 50 Hz. supply
Gearbox Oil: 4 US Gallons (15 Litres) of Shell Tivela S 320 ( See section
“Periodic Inspection & Maintenance” for further details )
Weight: 704 lb [319 Kg] without an undercarriage assembly;
979 lb [444 Kg] with KBM®-28-080 undercarriage assembly
†
Top speed can vary depending on variations of bevel depth, voltage and frequency.