Gullco GP-200 - Manual (Page 7)

5
The following provides a brief description of the GSP-1000 control (refer to the sketch below):
The Run/Stop Switch
 This is used to start and stop rotation of the positioner.
The Forward/Neutral/Reverse Switch
 This is used to select the direction of rotation.
The Speed Adjustment Knob
 This adjustment is used to increase (clockwise) or decrease (counter-clockwise) the
rotational speed of the positioner.
WARNING! Avoid changing the direction of rotation without making sure that rotation comes to a
complete stop first. Failure to comply may cause an overload.
WARNING! Avoid repeatedly starting and stopping the positioner in quick, short succession, as
this will reduce the life expectancy of the control and the motor.
Command Forward Motion
Speed Adjustment
Counter-Clockwise = Slower
Clockwise = Faster
Neutral
Command Reverse Motion
Control in Run Mode
Control in Hold (Stop) Mode