Groth 7658A - Manual (Page 6)

6
The table below is a partial list of vapors for which the MESG has been measured and found to be greater than or equal to
0.036" [0.92 mm]. If your system contains a gas not listed in the table, please consult the factory.
Chemical Compound MESG*
(mm)
MESG
(Inches)
acetone 1.02 0.040
acetonitrile 1.50 0.059
ammonia 3.17 0.125
amyl acetate 0.99 0.039
butane 0.98 0.039
butyl acetate 1.02 0.040
butyl alcohol 0.94 0.037
carbon monoxide 0.94 0.037
cyclohexane 0.94 0.037
decane 1.02 0.040
ethane 0.91 0.036
ethyl acetate 0.99 0.039
ethyl nitrite 0.96 0.038
heptane 0.91 0.036
hexane 0.93 0.037
isobutyl alcohol 0.96 0.038
Chemical Compound MESG*
(mm)
MESG
(Inches)
isooctane 1.04 0.041
isopentane 0.98 0.039
isopropyl alcohol 0.99 0.039
methane 1.14 0.045
methyl acetate 0.99 0.039
methyl alcohol 0.92 0.036
methyl ethyl ketone 0.92 0.036
methyl isobutyl ketone 0.98 0.039
octane 0.94 0.037
pentane 0.93 0.037
propane 0.92 0.036
propyl acetate 1.04 0.041
propylene 0.91 0.036
vinyl acetate 0.94 0.037
vinyl chloride 0.99 0.039
*Corrected MESG (mm), 100KpA, 20°C
MODEL NUMBER IDENTIFICATION
MODEL#

7658A
NOMINAL
SIZE

02"
Thru
6"
ELEMENT
SIZE

05"
Thru
12"
MATERIAL
 
Flame Element Winding
Body Material
3 = Carbon Steel
5 = 316 SS
Z = Special
OPTIONS
 
O = No Options
Z = Special
F = 150# A.N.S.I.
Flange
Z = Special Flanges
NOTES Include model number when ordering.
For special options, consult factory
EXAMPLE: 7658A - 02 - 05 - 35 - FO
Indicates a 2" Model 7658A with 5" Element Size, Carbon Steel Body, 316 SS Flame Winding, 150# Flanged Outlet, and no options
PRODUCT LIMITED WARRANTY
A. Seller warrants that products which are manufactured by Seller, are
manufactured in accordance with published specifications and free
from defects in materials and/or workmanship for a period of (12)
twelve months. Seller, at its option, will repair or replace any
products returned intact to the factory, transportation charges
prepaid, which Seller, upon inspection, shall determine to be
defective in material and/or workmanship. The foregoing shall
constitute the sole remedy for any breach of Seller's warranty.
B. THERE ARE NO UNDERSTANDINGS, AGREEMENTS,
REPRESENTATIONS, OR WARRANTIES, EXPRESS OR
IMPLIED, (INCLUDING MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE REGARDING PRODUCTS ) UNLESS
SPECIFIED IN THE SALES CONTRACT. THIS CONTRACT
STATES THE ENTIRE OBLIGATION OF SELLER.
Seller makes no warranties, either express or implied, except as
provided herein, including without limitation thereof, warranties as
to marketability, merchantability, for a particular purpose or use, or
against infringement of any patent of products. In no event shall
Seller be liable for any direct, incidental or consequential damages of
any nature, or losses or expenses resulting from any defective new
product or the use of any such product, including any damages for
loss of time, inconvenience, or loss of use of any such product.
C. The original Manufacturer shall be solely responsible for the design,
development, supply, production, and performance of its products
hereunder, and the protection of its trade name or names, if any. It
assumes no responsibility, for products modified or changed in any
way by its agent or customer. Any such modifications or changes to
products sold by Seller hereunder shall make the product limited
warranty null and void.
D. The Manufacturer shall be under no obligation to manufacture, sell,
or supply, or to continue to manufacture, sell or supply any of the
Products.