Greenheck Vari-Green Motor (IOM 473681) - Manual

1 Vari-Green Motor and Controls
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety information. Failure
to comply with instructions could result in personal injury and/or property damage!
Table of Contents
Reference part number listed in chart to locate specific motor
information page number.
HP Voltage
* RPM
Range
Encl. FLA
Control
Method
Motor
Part No.
Pg.
1/6 115 300-1725 TENV
3.1 0-10V Only 311352
2
3.1 Pot Only 311353
3.4 Pot/0-10V
311731
3 312359
313712
1/6 208-240 300-1725 TENV 1.6 Pot/0-10V
313233
3
313713
1/4 115 300-1725 ODP
3.9 0-10V Only 310107
2
3.9 Pot Only 310108
3.7 Pot/0-10V
311377
3
313714
1/4
115/
208-240 300-1725
ODP 3.3/1.8 Pot/0-10V 310175 6
1/4 208-240 300-1725 ODP 2.3 Pot/0-10V
313234
3
313715
1/2 115 300-1725 ODP
6.2 0-10V Only 309025
2
6.2 Pot Only 309028
6.7 Pot/0-10V 311812 3
1/2
115/
208-240 300-1725
ODP 6.8/3.5 Pot/0-10V 310176 6
1/2 208-240 300-1725 ODP 4.2 Pot/0-10V 313235 3
1/2 115 300-2500 ODP
6.5 0-10V Only 310307
2
6.5 Pot Only 310476
6.5 Pot/0-10V 312360 3
3/4 115 300-1725 ODP
10.1 0-10V Only 309026
2
10.1 Pot Only 309029
10.6 Pot/0-10V
311388
3
312619
3/4
115/
208-240 300-1725
ODP 9.0/4.9 Pot/0-10V 310177 6
3/4 208-240 300-1725 ODP 6.6 Pot/0-10V 314534 3
3/4 115 300-2200 ODP
11.3 0-10V Only 310306
2
11.3 Pot Only 310475
11.3 Pot/0-10V 312361 3
1 115 300-1725 ODP 12.4 Pot/0-10V
310359
3
312362
1
115/
208-240 300-1725
ODP 11.4/6.3 Pot/0-10V 310178 6
1
115/
208-240 300-1725 TEFC 12.0/6.0 Pot/0-10V
311156 4
1 208-240 300-1725 ODP 8.6 Pot/0-10V 314945 3
2 208-240 300 - 1725 TEFC 12.0 Pot/0-10V 310420 4
* Actual maximum RPM may vary. See RPM column in chart on
pg. 10 for specific motor and fan combinations.
Vari-Green ® Motor
The Vari-Green Motor is an electronically commutated
(EC) motor that uses AC input power and internally
converts it to a DC power supply which provides an
80% turndown capability and increased energy savings.
NOTE
When using a clamp meter to measure input amp
draw, the meter must be capable of reading a
non-linear current. Erroneous readings will occur
otherwise.
WARNING
To reduce the risk of fire or electric shock,
do not use this motor with any solid-state speed
control device.
Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Maximum RPM Table . . . . . . . . . . . . . . . . . . . . . . . 10
®
®
Document 473681
Vari-Green ® Motor and Controls