Greenheck ERVe and PVe (472119) - Manual (Page 2)

2 Model ERVe and PVe Curb and Duct Adapter Assembly
®
ERVe Hardware Required:
(24) Screws, SMS (A) 12 x 0.625 (IHH)
(2) End Channels
(1) Center Channel
(2) Side Channels
(1) End Support
STEP 2: Assemble Main Curb for Model ERVe
Instructions: • See ERVe Main Curb Assembly for positioning of the correct hardware.
• Align the holes and fasten as shown below.
ERVe Main Curb Assembly
Overall Curb Dimensions for Model ERVe
ERVe-20 ERVe-35 ERVe-45 ERVe-55
W 40.353 48.478 55.478 65.416
L 61.103 63.353 67.353 78.228
All dimensions shown are in inches.
End and side channels
fasten together, as shown.
End
Side and center channels
fasten together, as shown.
Supply Side Channels
End Channel
End Channel
Side Channels
End
Support
Center
Channel
L
W
End
Side and center channels
fasten together, as shown.
Supply Side Channels
End Channel
End Channel
Side Channels
End
Support
Center
Channel
L
W