Greenheck Jib Crane Assembly Instructions for Vektor (472081) - Manual (Page 2)

2 Jib Crane Assembly Instructions Jib Crane Assembly for Vektor ®
®
Step 3: Insert boom (C) over pivot pad inserted into
post. Step 4: Rotate jib crane boom straight up from the
roof deck. Temporarily install one 1 x 4.75 inch hitch
pin (E) into connection point 4 on the plenum. Lock
hitch pin in place with cotter pin (G). Secure jib crane
cable to now installed hitch pin located in plenum
connection point 4 with crane hook.
WARNING
Do not attach cable to windband lifting lug or to
access door lifting point on plenum.
NOTE
Cable on Vektor size 36 through 40 will require five
feet additional strapping (size 44 and larger will
require 15 feet) attached to the Crane Hook to raise
the jib crane assembly into position.
Connection Point 4
Hitch Pin (E)
Cotter Pin (G)
Crane Hook
Insert boom over assembled post / pivot pad.
C