Greenheck Hooded Propeller Fans (463563) User Manual
Assembly instructions, Exhaust and supply hood, shipped in halves, Step 1: unpack and inspect parts parts list

1
Hooded Propeller Roof Fans • Exhaust and Supply Hood Shipped in Halves
Assembly Instructions
Please read and save these instructions for future reference. Read carefully before attempting
to assemble, install, operate or maintain the product described. Protect yourself and others by
observing all safety information. Failure to comply with instructions could result in personal injury
and/or property damage!
®
PN 463563
Model Hooded Propeller Roof Fans
Exhaust and Supply Hood, Shipped in Halves
Step 1: Unpack and Inspect Parts
Parts List
Exhaust / Supply Fans
Fan Size / Quantity of Parts per Fan Size
Parts Description
18 20 24 30 36 42 48 54 60 72
Fan / Base Assembly
1
1
1
1
1
1
1
1
1
1
Hood Support Rail Assembly
2
2
2
2
2
2
2
2
2
2
Side Birdscreens (Long Screens) 2
2
2
2
2
2
2
2
2
2
Side Birdscreens (Short Screens) 2
2
2
2
2
2
2
2
2
2
Hood Rails
2
2
2
2
2
2
2
2
2
2
Hood Panels including 1 Male &
1 Female hood enclosure panel
4
4
5
6
7
8
9
9
10 11
Hood Clips for sizes 54 - 72
–
–
–
–
–
–
–
2
2
2
Shaded sizes will always ship fully assembled unless otherwise specified.
Tools required to assemble fans:
• Battery Drill, Electric or Pneumatic preferred.
• 3/8”, 7/16”, 1/2”, and 9/16” Wrenches and Sockets.
• 5/16” Nut Runner Bit for Drill.
• Rubber Mallet.
• Awl - for Hole Alignment.
IMPORTANT!
It is recommended
that a two man crew
minimum be used for
fan/hood assembly.
Each fan that is shipped knocked down
has the following hardware package
containing:
Note: Hardware package is designed for the filtered
72” fan. When used on smaller sizes, there will
be some fasteners left over.
Part # 827384 - Hardware Package
Part # 816526 - Hood Support Fasteners
(16) 3/8” - 16 x 3/4” Spinlock Bolts
(12) 3/8” - 16 Spinlock Nuts
Part # 827383 - Hood Fasteners
(8) 3/8” - 16 x 1/2” Spinlock Bolts
(8) 3/8” - 16 Spinlock Nuts
(2) Hood Clips
(4) #12 x 5/8” Screws
Part # 816528 - Birdscreen / Filter Fasteners
(26) 5/16” - 18 x 3/4” Weld Stud Bolts
(26) 5/16” - 18 Spinlock Nuts
(4) #12 x 3/4” Self-Drilling Screws w/ Washer
Hood Enclosure
Panel (Female)
Hood
Support
Rail
Long Birdscreen
Section
Short Birdscreen
Section
Hood Panels
Hood Clips (Sizes 54 - 72)
Hood Enclosure Panel (Male)
Label