Greenheck Fabra Hood, Multi Section with Birdscreen, throat length greater than 72 inches (471323) - Manual (Page 3)

Step 7
Step 8
3 Fabra Hood • Form C and D
Step 9
Figure 6 Fabra hood Form C & D 471323
Figure 7 Fabra hood Form C & D 471323
Figure 8 Fabra hood Form C & D 471323
Figure 6
Figure 7
Figure 8
Install the END BIRDSCREEN ASSEMBLY.
(See figure 6) Turn the BIRDSCREEN CLIPS
(Which are preassemble to the END BIRDSCREEN
ASSEMBLY) so that two (2) are under the SIDE BIRDSCREEN FRAME EXTENSION and the other
two (2) are under the HOOD SUPPORT ANGLE and
tighten down. (See Figure 6, DETAIL "D")
Bolt together the HOOD RAIL ASSEMBLY LEFT to the
HOOD RAIL ASSEMBLY RIGHT, using two (2)
5 ⁄
16
X 1
inch fasteners per HOOD RAIL ASSEMBLY.
(See figure 7)
Attach the HOOD RAIL ASSEMBLY to the HOOD
SUPPORT ANGLES using two (2)
3 ⁄
8
x 3 ⁄
4
inch fasteners per
HOOD RAIL ASSEMBLY. (See Figure 8) NOTE: Fasteners
should be hand tightened only until step 11.