Call completion for local extensions, Configuration, Figure 1: enable call completion for extensions – Grandstream UCM6100 Busy Camp-on Guide User Manual

Page 4

UCM6100 Busy Camp-on Guide Page 3 of 10

CALL COMPLETION FOR LOCAL EXTENSIONS

CONFIGURATION

1. On UCM6100 web GUI->PBX->Basic/Call Routes->Extensions page, create or edit an extension

(e.g., 1000) to bring up the dialog in below figure.

2. Click on

“Features” tab and make sure the following are configured:



“Enable CC”: selected



“CC Mode”: set to “Normal”

Figure 1: Enable Call Completion for Extensions

3. Configure the above steps to another extension 1001 if extension 1001 is the party that will be on the

call with extension 1000.