Grandstream UCM6100 Asterisk Manager Interface (AMI) Guide - Manual (Page 9)

UCM6100 Asterisk Manager Interface (AMI) Guide Page 8 of 14
2.3. Configure the following parameters in “AMI Settings” dialog. Users can connect AMI using TCP or
TLS. If using TLS, please set “TLS Enable” to “Yes”.
Table 2: AMI Settings Parameters
Parameter Definition
AMI Port
Configures the port number to listen to for AMI connection. The default
setting is 7777.
TLS Enable
Enables listening for AMI connections using TLS. The default setting is
No.
TLS Port
Configures the port to listen to for TLS-based AMI connection. The default
setting is 5039.
TLS Bind Address
Configures the address to listen to for TLS-based AMI connections. The
default setting is 0.0.0.0, which mean all addresses.
TLS Private Key
Upload TLS private key for TLS-based AMI connection. The size of the
key file must be under 2 MB. After uploading, the file will be automatically
renamed to “ami_private.pem”.
TLS Cert
Upload the TLS cert for TLS-based AMI connection. It contains private key
for the client and signed certificate for the server. The size of the certificate
must be under 2MB. After uploading, the file will be automatically renamed
to “ami_certificate.pem”.
2.4. Click on “Save” and then “Apply Changes” to save the AMI settings.