Establishing connection and user authentication, Figure 6: telnet settings in putty – Grandstream UCM6100 Asterisk Manager Interface (AMI) Guide User Manual

Page 10

UCM6100 Asterisk Manager Interface (AMI) Guide Page 9 of 14

3. ESTABLISHING CONNECTION AND USER AUTHENTICATION

3.1. To connect AMI using TCP, simply use Telnet to connect to UCM6100

’s IP address with AMI port.



If using command line, users can type in:

telnet 192.168.40.237 7777



If using PuTTY

, users might need change the Telnet setting “Telnet Negotiation Mode” to “Passive”

first. Then initiate Telnet connection to AMI from Putty.

Figure 6: Telnet Settings in PuTTY