beautypg.com

Grandstream UCM6100 Asterisk Manager Interface (AMI) Guide User Manual

Page 6

background image

UCM6100 Asterisk Manager Interface (AMI) Guide Page 5 of 14

1.4. Configure the following parameters

in the “Create New AMI User” dialog:

Username

Configure a name for new AMI user. The username needs to be at least 8 characters. For example,

ucmamiuser1.

Password

Configure a password for this user to connect to AMI for authentication purpose. The password

has the following requirement:

- at least 6 characters

- must contain numeric digit

- at least one lowercase alphabet, or one uppercase alphabet, or one special character

Permitted IP(s)

Configure an IP address Access Control List (ACL) for addresses that should be allowed to

authenticate as the AMI user. If not set, all IPs will be denied. The format is IP/subnet. For

example, 192.168.40.144/255.255.255.255.

Privilege

Configure the privilege for the AMI user. Please see options and definitions in below table.