Dynex DX-ESATAP - Manual (Page 13)

Specifications
13
Specifications
An eSATA
peripheral is not
detected by the
computer Right-click the My Computer icon on your desktop, click
Properties, then click the Device Manager. If the SATA
peripheral is listed in the Device Manager, it should be
working correctly.
If it is shown as an unknown device, the cause may be a
defective eSATA peripheral or its software drivers. Do the
following:
• Check the eSATA connection and try a different eSATA cable.
• Check your SATA device's power source, and make sure that it
provides enough power for your SATA device to run stably. Refer
to the SATA peripheral’s user guide for the power supply
specifications.
• Uninstall your SATA device, then reinstall the SATA device driver.
• Make sure that the SATA device is using a current driver. You can
download current driver software from the manufacturer's Web
site.
Chipset
Silicon Image 3132
Interface
One-lane PCI Express bus
Power port
External: 2 Ч Ш1.3 DC Jack
Internal
1 × 4-pin power connector
System
environment
Operating temperature: 41°F~104°F (5°C~40°C)
Operating humidity: 20%~80% RH
System
requirements
Windows XP, Windows Vista; Mac 10.4.x or higher
Certification
FCC Class B, ICES-003
Symptom Possible Solution
07-643 DX-ESATAP - small combined.fm Page 13 Thursday, December 27, 2007 12:08 PM