Grandstream GSurf Pro User Manual - Manual (Page 21)

Grandstream Networks, Inc. GSurf_Pro USER MANUAL Page 21 of 45
Version 1.0.0.12 Updated : 06/2013
4. To assign this alarm action rule to a device, open System Config->Device Config.
5. In the Device Configuration window, select the device.
6. Select an Alarm action rule for Motion Detection to monitor motion detection events; select an alarm
action rule for Alarm Input if you would like to monitor alarm input events.
7. Click Save button to save the settings.
Figure 14: Assign Alarm Action Rule To Device
Additionally, users could select Batch Configuration to assign the same alarm action to multiple devices.