Grandstream GSurf Pro User Manual - Manual (Page 17)

Grandstream Networks, Inc. GSurf_Pro USER MANUAL Page 17 of 45
Version 1.0.0.12 Updated : 06/2013
MODIFY IP
1. Select the device in the searching result.
2. To set up new static IP, input the new IP, subnet mask and gateway, then click on Modify IP button. To
make sure the new static IP is available in the network, after filling out the new IP address, click on Ping
button and the result will show in the prompted message.
3. To set up new IP with DHCP, user could check the option Use DHCP so a new IP will be automatically
assigned.
Figure 10: GSurf_Pro Search Tool - Modify IP
Use DHCP to
assign new IP
To check if the
new static IP is
available