Grandstream DP715 Quick Start Guide - Manual (Page 6)

~7~ ~8~
Please download the user manual and FAQ for more
detailed configuration instructions:
http://www.grandstream.com/products
DP715 CONFIGURATION
Configure using Interactive Voice Prompt
1. From the registered Handset, press *** to get into the IVR
menu. Enter option 02 to obtain the DP715 IP address.
2. Type the DP715 Base Station IP address in your PC browser.
3. Log in using password “admin” to configure the DP715 Base
Station.
You will need the following information
to configure the Base Station via the web
browser:
• IP address, subnet mask and gateway IP if using static IP.
• SIP server and/or Outbound Proxy FQDN or IP address.
• User subscriber information: User ID, Authentication ID, Pass-
word.
• DP715 supports “Plug-n-Call” if your ITSP (Internet Telephony
Service Provider) provides this automatic provisioning service.
Ensure the DP715 has an internet connection (either DHCP or
static IP in your internet ready network), then power up the
device.
• Please contact your ITSP for additional settings that may be
necessary to configure the device.