Grandstream DP715 Quick Start Guide - Manual (Page 4)

~3~ ~4~
Setting up the DP710 charging station O
VERVIEW
Grandstream Dect Phone/Base station series offers a com-
prehensive line of affordable VoIP access devices based on
Grandstream’s innovative and proprietary technology plat-
form. The Dect phone series offers the entry-level IP Telephony
user superb audio quality, rich functionalities, interoperability
with the leading 3rd party VoIP providers, and compatibility
with most service providers.
Important: The DP715 base station acts as a DECT Gateway
that can handle its own handset plus up to 4 additional hand-
set (DP710) by sharing one SIP account or using individual
ones.
S
ETTING UP THE DP715
Power Reset Network
Please refer to the following steps to set up the DP715.
1. Plug the power supply plug into a power source socket. Plug
the connector into the connector socket on the underside of
the base unit.
2. Connect the Network socket on the underside of the base
unit to the Network connection socket using the Network ca-
ble provided.
Plug the power supply plug into a power source socket to start
using the charging unit.
1
2
1: Underside of the charging unit
2: Power supply plug
Inserting the batteries in the handset
1. Open the battery compartment (see below).
2. Insert the batteries in the correct polarity (+ and -).
3. Close the battery compartment.
4. To charge the rechargeable batteries for the first time, place
the handset in the base unit or charging unit for 16 hours.
+
-
+
-
1
2
3
1: Battery compartment
cover
2: Batteries
3: Rear of handset