Grandstream DP715 Quick Start Guide - Manual (Page 5)

~5~ ~6~
Register the Handset to the DP715
Base Station
Refer to the illustration below when following the instructions
on the next page.
1. Display
2. Right display button
(display functions)
3. Up/Redial list key
4. Right/Recall key
5. On-hook/Power Key
6. Alphanumeric keypad
7. Keypad lock key
8. Microphone
9. Ringer off-key
10. Down/Calls list
key
11. Off-hook key/Hands-
free key
12. Left/Internal call key
13. Left display button
(display functions)
Step 1: Turning the handset ON
Press the power button to turn the handset on.
Note: The original handset included in the DP715 package is
pre-registered to the Base. To register any additional Handset,
please follow step 2 below.
Step 2: Registering the handset
1. Press .
2. Press or repeatedly, select Handset.
3. Press to confirm.
4. Press or repeatedly, select Registration.
5. Press to confirm.
6. Select “Register” and press .
7. Select the base unit (1-4) desired using or
and press .
8. Enter the base unit PIN (System PIN; default: 0000) and
press .
• At this stage, the message “Restart base” will appear on the
display. This requires the DP715 base station to be in subscrip-
tion mode which can be either enabled from the web con-
figuration menu or by powering cycle the base.
• The handset will now search for the base unit and register
when it has found it. The display shows standby mode after a
successful registration the handset name and handset num-
ber appear.
8
4 5
DEF
2 3
JKL
ABC
MNO
WXYZ TUV
GHI
PQRS
1
6
7
0
9
INT R
#
1
2
12
10
11
13
9
8
7
6
5
3
4
5
2
2
2
2
3 10
3
3 10
10
2
2