Grandstream GXP2200 XML Phonebook Guide - Manual (Page 9)

FIRMWARE VERSION 1.0.3.2 XML BASED DOWNLOADABLE PHONEBOOK GUIDE Page 8 of 21
• Replace Duplicate Items
If this option is set to "Yes", the duplicate entries in the Contacts will be automatically replaced with the
ones in the downloaded XML phone book. The default value is "No".
• File Encoding
The encoding format for the XML phone book file. Users could select "UTF-8" or "GBK" (for Chinese
characters). The default value is "UTF-8".
• Download Server
This specifies the path where the phone is going to download the XML phone book file. Since
download method is already specified in the previous selection, users do not have to provide this
information in the server path. The accepted format are as follows:
IP_address[:port]/dir
Hostname[:port]/dir
Examples:
192.168.40.10/XMLphonebookdir
192.168.40.10:443/XMLphonebookdir
service.mycompany.com/XML/phonebook
mycompany.com:8080/phonebook
Note:
1. If "[:port]" is not specified, port 80 will be used as default for HTTP and Port 69 will be used as
default for TFTP;
2. The GXP2200 will always look for the phone book file phonebook.xml for downloading if no file
name is specified in the server path. Users could also change the phone book name if desired. In
this case, the file name needs to be specified in the server path (e.g.,
192.168.40.10/XML/gxp2200contacts.xml).
• Interval
This specifies the phone book automatic download interval (in minutes). The valid value is 0, 120, 240,
360, 480 and 720. If it's set to 0, automatic download will be disabled.
After the above configuration, tap on "OK" to save the change. Users could also always tap on "Download
Now" to start the downloading process.