Geist RAC - Manual (Page 6)

6 Revision Date: 09/03/2014
Figure 2: RAC10 Wall Mount
Network Overview
This product comes preconfigured with a default IP address set. Simply connect to the RAC and
access the web page with your browser.
Default IP Address
RAC units have a default IP address for initial setup and access to the unit if the assigned
address is lost or forgotten. Once an IP address is assigned to a unit, the default IP address is
no longer active. To restore the default IP address, press and hold the reset button located
below the network connector for 20 seconds. The idle and activity lights on the network
connector will both light up when IP address has been reset. The reset button is accessed
through the white, circular hole located below the Ethernet jack.
Note: Pressing the reset button under the network connector will restore the default IP address
and will also clear all password settings.